Seals end grain porous areas.
- A neutral odour
- Quick drying
- Easy to apply
The end grain sealer should be applied after the primer and sanded midcoat.
After drying of the sealer, the sealed areas can be coated with all Sikkens mid and finish coating systems.
Coverage rate 100 ml/m²
Thinning Do not thin
Application temperature 15-25 °C for substrate, air and material at approx.60 % R.H.
Drying times The drying process of the materials can be delayed depending of applied wet film thickness and when using timber with a high extract contents and drying in damp/cold weathering conditions. During the drying process ensure adequate ventilation and temperature conditions.
Dust dry after approximately 30 Minutes
Recoatable after approx 1 hour with waterborne coatings
Cleaning of equipment Clean directly after use with water or washing up liquid or with
ST 830* (cleaning agent).