Fire Retardant Paint for Wood ES/VFR - Envirograf 92

New product

ES/VFR?Fire Retardant Paint for Wood?

Envirograf Product 92

- Apply 2 coats for Class 0 ?and 1 coat for Class 1 spread of flame protection

- Complies with UK & EU Fire Regulations

-?For use on new & previously coated interior and exterior wood

- Requires a protective top coat?

-?Supplied in clear, white or can be tinted to any colour

More details

Product Info

ES/VFR?Fire Retardant Paint for Wood?

Envirograf Product 92

Fire protection doesn't have to compromise your building's appearance...

Envirograf's?ES/VFR fire resistant paints dry to an attractive hard-wearing finish.?They are available in ready-mixed white and clear?or can be tinted to?any colour from any trade, professional or DIY colour card. ?

ES/VFR products are designed to upgrade new and existing wood to comply with both UK and European Fire Regulations.?Envirograf's ES/VFR fire resistant paint system gives wooden surfaces Class 0 or Class 1 spread of flame protection.

To achieve?Class 0 protection, two coats of ES/VFR paint at 12-15m2?per litre must be applied, for Class 1 protection, apply 1 coat. A protective top coat must be applied over ES/VFR paint to guarantee durability and fire protection.?You can apply ES/VFR coatings just as you would any other paint, using a brush, roller or spray.?

ES/VFR products can be applied to?all types of interior and exterior wood including; bamboo, hardwood, softwood, veneer, MDF, and melamine boards.?

For more information about the ES/VFR system read our blog about Avanti Architects' fire protection project.

ES/VFR Primer ?- water-based fire retardant primer for interior and exterior wood?

A water based primer which provides a first class foundation for Envirograf's ES/VFR fire retardant coating. ES/VFR primer provides good adhesion, high opacity and grain filling properties.?

ES/VFR primer is needed when coating surfaces which have previous coatings of wax, paint or varnish and when coating untreated Oak.?

ES/VFR Paint - water-based fire retardant paint for interior and exterior wood?

This fire resistant paint is very hard-wearing. It can be used on new wood without a primer. To achieve Class 0 Fire Protection, 2 coats of the ES/VFR fire retardant paint must be applied at 12-15m2?per litre. To achieve Class 1 Fire Protection, apply 1 coat of ES/VFR paint at 12-15m2?per litre.

This product MUST be overcoated with a protective Interior or Exterior topcoat to increase its lifetime and guarantee fire protection.

Technical Data
Coverage 10-12m2 per Litre
Application Brush, Roller or Spray
Waterbased Yes
03.Drying Time (Recoat) 2 hours
Colour Clear, White, or Tinted to your Colour
Thinning max 5% if spraying
Clean Up Water

Fire Retardant ES/VFR

Health and Safety Datasheet

Download PDF

Fire Protection Paints

How do Fire Protection Coatings Work

Download PDF
Fire Performance

ES/VFR and QVFR coatings have had numerous tests on many surfaces to meet BS476 Part 6 (1989) Spread of Flame and BS476 Part 7 (1989) Spread of Flame.

Complies with Classification B/S1/d0 of European Standard EN13501 Parts EN13823 (2002) single burn test (SBI) and EN11925-2 (2002) ignitability.

8 other products in the same category:


Compare 0