Rubbol WP 193 protects the overall finish from discolouring extractives and provides good pore wetting, high filling capacity, has low odour and is easy to sand.
Application Methods and Coverage Rates
Spray to a wet film thickness of 100 to 150µm. Thin if neccessary with water up to 5% by volume
Coverage rate 100 - 150 ml/m² depending on applied wet film thickness per coat without losses. If brushing on small areas the coverage rate is 60 - 80 ml/m² depending on the type and absorbtion properties of the timber.
Application temperature 15-25 °C for substrate, air and material at approx.60 % R.H.
Drying times The drying process of the materials can be delayed depending of applied wet film thickness and when using timber with a high extract contents and drying in damp/cold weathering conditions. During the drying process please ensure adequate ventilation and temperature conditions.
To achieve optimal isolating properties, a curing time of a minimum of 8 hours is required.
Drying times at 23C/50 % R.H. DIN 50014
Dust dry: after approx. 30 Minutes
Sandable: after approx. 4-6 hours
Recoatable: after approx 4-6 hours with a waterborne finish
Cleaning of equipment - Clean directly after use with water or washing up liquid or with Sikkens ST 830* (cleaning agent).