Teknos Teknoseal 4002 MDF Sealer is a waterborne, sprayable industrial sealer for large areas of MDF/HDS exterior grade for windows and doors.
The sealer inhibits water and reduces humidity ingress providing dimensional stability to the wood.
Before treating the surface the material must be clean and free from any form of dust or contamination. All parts of the appliaction procedure must be pre-treated with a Teknos primer and in order to secure optimum effect all milled grooves and cut edges must be pre-treated by using a brush with TEKNOSEAL 4002. Before any product is sprayed on.
Airmix (aircoat) or airless by hand or in automatic spraying equipment.
The product upon delivery is ready for use. Always stir the product well before applying.
All treated products must be protected with a topcoat treatment before they can be exposed to any influence of the weather.
Coverage Rate 6-8m2/l
All drying times for this product depends on the temperature of the room. See the technical data sheet for more information.
Dry to recoat: 2-3 hours
The equipment that is used must always be cleaned out with water.
Health and Safety
For more information on the health and safety aspects of this product please consult the attached safety data sheet.
Pack Size: 1L,5L,20L
Storage: The product must be stored at temperatures above 5 degrees. Shelf life in unopened containers. Always keep the containers tightly closed after use.