Top sellers

Sikkens Cetol WM 680

New product

A highly transparent, isolating mid coat for timber components utilising 'Ion-Lock-Technology'

Interior and Exterior use 

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£12.50

- +

 
Product Info

lon-Lock-Technology isolates timber extractives in opaque and translucent coatings. The new binder structure of Cetol WM 680 offers protection against dis­colorations of the wood surface. Also, the innovative mid coats increase the weather resistance of the entire coat­ing system thanks to good pore wet­ting and filling

 

Application Method

Spray only

Working viscosity is approx. 12 seconds in a DIN cup 4 mm i.e. approx. 28 - 32 seconds in a ISO cup 3 mm at 20° C material temperature.

 

For better isolation it is recommended - especially with Oak and light colour tints - to apply 2 X midcoat.

 

Consumption 100-150 ml/m2

 

Thinning  If necessary with water up to a maximum of  5 %.

 

Application temperature 15-25 °C for substrate, air and material at approx.60 % R.H.

 

Drying times The drying process of the materials can be delayed depending of applied wet film thickness and when using timber with a high extract contents and drying in damp/cold weathering conditions. During the drying process ensure adequate ventilation and temperature conditions.

 

 To achieve optimal isolating properties, a curing time of minimal 8 hours is required

 

Drying at 23 C/50 % R.H. DIN 50014

Dust dry after approx. 30 Minutes

Sandable  after approx. 4-6 hours

Recoatable  after approx  8-10 hours waterborne

 

Cleaning of equipment  Clean directly after use with water or washing up liquid or with

ST 830* (cleaning agent).

 

Storage A dipping tank containing material must be covered correctly and stirred or circulated regulary.

 

Disposal  Only residue emptied cans can be disposed via recycling. Liquid wastes must be disposed of according to national regulations or according to EU-disposal key 08 01 12.

 

VOC guideline EU limit value for this product (Kat. A/e): 150 g/l (2007)/130 g/l (2010). This product contains max. 50 g/l VOC.

 

 

 

 
 
Technical Data
Application Spray and Brush
01.Drying Time (Touch Dry) 30 minutes
02.Drying Time (To handle) 4 hours
03.Drying Time (Recoat) 4 - 6 hours
Type Single Pack
 
Download

Cetol WM 680

Technical Data Sheet

Download PDF
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Write a review

Sikkens Cetol WM 680

A highly transparent, isolating mid coat for timber components utilising 'Ion-Lock-Technology'

Interior and Exterior use 

Write a review

 
Comments(0)

No customer reviews for the moment.

Menu

Top
Compare 0