New

Teknos Hardener for 3393/3394

New product

Teknos Hardener for 3393/3394

Teknos Hardener is a water borne two pack polyurethane topcoat where the hardener that is used is a aliphatic isocyanate resin.

The systems are used as 1-layer and 2-layer system directly on various composite materials and certain types of plastics. The use of this product is recommended where the topcoat is required to have excellent gloss and colour retention. 

More details

£5.56

- +

Brand: Teknos

 
Product Info

Surface Preparation

Clean the surfaces for any contaminants before painting. The surfaces are prepared according to the different materials. Any previous painted surfaces with any form of impurities such as grease and salts are removed from the surface. The surfaces must be dry and clean before beginning the application process. Any old painted surfaces that have exceeded the maximum overcoating time are to be roughened as well. The place and the time of the preparation are to be chosen so that the prepared surface will not get dirty or damp before the subsequent treatment. 

Mixing of the components

When mixing this product with a standard product. Slowly add the hardener in one go during the mechanically stirring process. The stirring time is for 5 minutes. Any inadequate stirring or wrong mixing ratio will result in imperfect curing and impaired film properties. All dosage may also be done through a 2--k mixing system. 

Application

For application conventional spraying is recommended (airless, airmix, aricoat) with nozzle size 0.011-0.013. The components are not to be thinned separately. The hardener of the paint and the ready paint mixture contain isocyanates. In any poorly ventilated areas  and especially when using a form of spray application, we recommend the use of a fresh air mask. In short or temporary work it is recommended that both the face and the eyes are to be protected. 

Application conditions and drying times

The surface that is going to painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +18 degrees and the relative air humidity above 50% and below 70%. 

The surface temperature, film thickness, drying temperature and ventilation will all affect the drying of the paint. All forms of low temperatures and insufficient ventilation slow down the drying process. 

Cleaning of the equipment

To clean this product in the correct way always wash your equipment off with clean fresh water. 

Additional Information

The storage stability for this product is shown on the label. Store this product indoors in a cool and dry place in a tightly closed can. The hardener reacts with any form of air humidity and therefore when the can is opened is to be kept tightly closed after usage of the product. This product must be used within 14 days.

Health And Safety

For more information on the health and safety aspects of this product please consult the attached safety data sheet. 

 
Technical Data
Waterbased Yes
Type Two Pack
Colour Colourless
Clean Up Water
VOC See Safety Data Sheet
 
Download

Teknos Hardener 3393/3394 PDS

Teknos Hardener for 3393/3394 (Product Data Sheet)

Download PDF

Teknos Hardener 3393/3394 SDS

Teknos Hardener for 3393/3394 (Safety Data Sheet)

Download PDF

Write a review

Teknos Hardener for 3393/3394

Teknos Hardener for 3393/3394

Teknos Hardener is a water borne two pack polyurethane topcoat where the hardener that is used is a aliphatic isocyanate resin.

The systems are used as 1-layer and 2-layer system directly on various composite materials and certain types of plastics. The use of this product is recommended where the topcoat is required to have excellent gloss and colour retention. 

Write a review

 
Comments(0)

No customer reviews for the moment.

30 other products in the same category:

Menu

Top
Compare 0