New

Teknos Teknoseal 4009 V Joint Sealer

New product

Teknos Teknoseal 4009 V Joint Sealer

A strong aqueous and flexible product for the protection of V-Joints and corner joints.

This product is not intended as a filler as it has no structural strength and should not be sued in any way to bridge any form of gaps. This product is colourless.  

More details

£13.35

- +

Brand: Teknos

 
Product Info

Pre-treatment

The wood surface must be clean and free from any form of wood dust or contamination. The moisture content of the wood should be approx 13% and should never exceed 15%.

All types of softwood and non durable hardwood for exterior use should always be vacuum impregnated (only softwood) or treated with a form of wood preservative. 

Application

The pre-treatment/primer must be thoroughly dry before the product is applied. 

Is applied by caulk gun in a thin layer. Smooth with damp/moist, but not a wet sponge. Possible surplus is removed. 

Application Conditions

The product upon delivery is ready for usage. Contraction for volume approx 25%. 

Optimum temperature for products and surroundings: 18-25 degrees. 

Do not use this product below temperatures of 15 degrees. 

System Treatment

All primed parts must always be protected with a topcoat temperature before they are exposed to any form of weather.

Drying Times

Determined at 23 degrees and 50% RH

The main drying time for this product is 2-4 hours. 

If you play excessive amounts of this product the whole drying times will be increased even more. 

Cleaning

The equipment must be cleaned with water. 

Health and Safety

For more information on the health and safety aspects of this product please consult the attached safety data sheet. 

Additional Information

Pack Size: 320ml cartridge

Storage: This product must be stored at temperatures above 5 degrees. Shelf life in unopened containers: Keep all containers tightly closed after usage. 

 
Technical Data
Application Caulk Gun
Waterbased Yes
02.Drying Time (To handle) 4 hours
Type Single Pack
Clean Up Water
VOC See Safety Data Sheet
 
Download

Teknoseal 4009 PDS

Teknoseal 4009 V Joint Sealer (Product Data Sheet)

Download PDF

Teknoseal 4009 SDS

Teknoseal 4009 V Joint Sealer (Safety Data Sheet)

Download PDF

Write a review

Teknos Teknoseal 4009 V Joint Sealer

Teknos Teknoseal 4009 V Joint Sealer

A strong aqueous and flexible product for the protection of V-Joints and corner joints.

This product is not intended as a filler as it has no structural strength and should not be sued in any way to bridge any form of gaps. This product is colourless.  

Write a review

 
Comments(0)

No customer reviews for the moment.

Accessories

30 other products in the same category:

Menu

Top
Compare 0